48 STEP PER DEGREE GYRO RETRANSMISSION UNIT, KW912

IN, 6 steps per degree low voltage
OUT, 6 steps per degree high voltage

WE HAVE STOPPED MAKING THIS PRODUCT FOR STOCK. USE THE KW941s

KW911 STEPPER AMPLIFIERThe KW911 converts low voltage and low power stepper gyro signals into high levels.

It is used when a modern gyro replaces an old one and the stepper voltage levels are different. 

It may be driven by the KW909 or KW910 synchro interface. This allows basic gyros to be interfaced fully, at low cost.

STEPPER INPUT:

3 DC step lines, common positive or negative.

4 to 35 volts 

OUTPUT:

Voltage and regulation depends on the transformer fitted. 

24 to 70 volts nominal. 

Current 3 amps per step.

Rectified unsmoothed step output is available to order.

POWER INPUT and ENCLOSURE

115 or 220 volts 50/60 Hz nominal.

Grey electrical enclosure with door 350 x 250 x150 mm.

Room inside to fit A2770/KW910 synchro to stepper interface

PDF  Download data sheet   

Open the web site at the start

ADITEL MARINE ELECTRONICS 

UK.
Tel / fax 44 (0) 1873 840405
Fax: 44 (0) 1873 840106
AMI 44 (0) 2380 480450
E-mail: